Contaminated Liquid Waste

Contaminated Liquid Waste Removal in Sydney & The Surrounding Areas

Contaminated Liquid Waste 

Brandster Services is an NSW Environmental Protection Agency (EPA) licensed agent and transporter of J100, J120 and N140 classified liquid waste and operates a fully licensed receiving facility.

 

The EPA introduced Waste Tracking to help eradicate illegal dumping of environmentally hazardous waste, prevent waste from going to the wrong facility and stop unfair competition.

 

We can assure you that your service requirements are met and that your good corporate citizen responsibilities are maintained end-to-end by transporting, treating and disposing of your contaminated liquid waste in a lawfully compliant and environmentally responsible manner.

 

Brandster Services also strictly complies with the EPA Waste Tracking System, supplying authorised Transport Certificates and completing online reporting.

 

Brandster Services is licensed to transport, receive and treat the following types of environmentally hazardous waste (subject to the EPA waste classification criteria below):

  • Bilge Water (cruise ships, boats, barges)
  • Boiler Blowdown Sludge
  • Car Wash Bay Water
  • Contaminated Ground Water
  • Contaminated Liquid Waste
  • Cooling Tower Washwaters
  • Dilution Pits
  • Ethylene glycol water (antifreeze)
  • Fire Washwaters
  • Fuel Tanks
  • Gross Pollution Traps
  • Holding Tanks
  • Hydrocarbons (waste)
  • Industrial Liquid Waste
  • Lift Shafts
  • Liquid Sludges
  • Mineral Oils
  • Oil Filters
  • Oil Separator Pits
  • Oily Water
  • Silt Pits
  • Spills (contaminated liquid waste)
  • Stormwater Pits and Retention Wells
  • Textile Effluent & Residues nos
  • Transformer fluids (excluding PCB’s)
  • Triple Interceptor Traps
  • Underground Holding Tanks
  • Other liquid waste classified as J100, J120 and N140
  • Bilge Water (cruise ships, boats, barges)
  • Boiler Blowdown Sludge
  • Car Wash Bay Water
  • Contaminated Ground Water
  • Contaminated Liquid Waste
  • Cooling Tower Washwaters
  • Dilution Pits
  • Ethylene glycol water (antifreeze)
  • Fire Washwaters
  • Fuel Tanks
  • Gross Pollution Traps
  • Holding Tanks
  • Hydrocarbons (waste)
  • Industrial Liquid Waste
  • Lift Shafts
  • Liquid Sludges
  • Mineral Oils
  • Oil Filters
  • Oil Separator Pits
  • Oily Water
  • Silt Pits
  • Spills (contaminated liquid waste)
  • Stormwater Pits and Retention Wells
  • Textile Effluent & Residues nos
  • Transformer fluids (excluding PCB’s)
  • Triple Interceptor Traps
  • Underground Holding Tanks
  • Other liquid waste classified as J100, J120 and N140

EPA Waste Code Descriptions The EPA has defined environmentally hazardous waste into Waste Codes that reflect the waste contaminants or source. Waste must be classified prior to collection and transport. It is the responsibility of the waste producer/generator to classify the waste type. All possible contaminants must be identified, which may require having a laboratory test analysis performed. Brandster Services is happy to guide and assist you in this process, please contact us online or speak to one of our friendly team on 02 9623 1177.

J100 – Waste mineral oils

  • Mineral oils unfit for their original intended use
  • Oil filters
  • Transformer fluids (excluding PCB’s)
  • Waste hydrocarbons

J120 – Waste oil/hydrocarbons mixtures/emulsions in water

  • Oil/hydrocarbon (<50%) mixed with water
  • Oil/hydrocarbon (>50%) mixed with water
  • Other (cutting oils, soluble oils)
  • Oil/hydrocarbon mixed with water nos

N140 – Fire debris and fire wash waters

  • Fire Washwaters

Please contact us online or speak with one of our helpful staff on 02 9623 1177 to discuss your liquid waste classification and Waste Tracking requirements.

 

For more information on Waste Codes and Waste Tracking please visit the NSW EPA website.

Do you need help with your waste removal?

Contact us today on (02) 9623 1177 for a free cost estimate!

Share by: